Is it possible to make multi-lingual screens in 1 project?
Is it possible to make multi-lingual screens in 1 project? If so, can the language be switched by touchscreen operation?
Yes, it is possible. You will need to use the String resource. The String resource is a read only string that can be used on all screens. It can be displayed by linking to Parts such as Labels. Multiple strings can be registered to 1 "String ID". Which string will be displayed will depend on the current string mode.
Example:
| String ID | String Resource Set A | String Resource Set B |
|---|---|---|
| STR00001 | RUN | EJECUTAR |
| STR00002 | STOP | DETENER |
When the String mode is set to "String Resource Set A", Parts linked to STR00001 will display "RUN".
String Mode will depend on the [String Resource Set ID] set to [STRMODE]. In the example above, the String Resource Set A ID is "STM00001", whereas for the String Resource Set B, the ID is "STM00002".
Therefore, when the value of [STRMODE] is "STM00001", "RUN" is displayed, and if the environmental variable [STRMODE] is changed to "STM00002" by Action such as "String Copy", then "STOP" is displayed.
* Font type and Font selections vary depending on the model. Please refer to each product specification for the spec of the model you are using.
Contact us for the specification manual of your model from below.
Sample of setting screen of clock using Numeric Keypad
| File Name | SAMPLE_language_switch_IS711-4_201.ipp |
|---|---|
| Project Version | 2.1.2.201 |
| Project Model | IS711-4S |
- Touch the [English」button and the display will be in English.
- Select [Espanol] and the display will be in Spanish.
In order to display Spanish (Espanol), place a check next to the "Latin Gothic" of the System Font Selection Dialog.
